Comparator Setup Software

Free software for setup and calibration of our DR1E, DR1M, SR1E, SR1M, & SR2E, SR2M series comparators is available at
Click here for the full software page

<OR>

Just download the IS3 4 5.exe directly
Click here to download software

To return to default factory settings, follow these instructions:

  1. Download and store DR1 or SR1 default setup file to your desktop
  2. Connect the gage to your laptop with a USB cable
  3. Go into your device manager to make sure which is your serial com port
  4. Run the Laurel setup software
  5. On Communications screen click RS232/USB
  6. On the next page click your serial port #, then “establish”, then “main menu”
  7. On main menu click “file” and “open setup”
  8. Locate and select setup file stored on your desktop. Highlight and click “open”
  9. On main menu click “DPM” and click “put setup”
  10. On main menu click “file” and “exit”
  11. Click “quit” on the communications screen.

Comparator will be re-programmed to default settings.