Air Plugs, Air Spindles, Air Probes
Probes/Spindles
Air Probes/Spindles/Plugs for I.D. measurement
-
- Size and tolerance (including nominal) of diameter to be measured.
- Type of system and required amplification, magnification or scale, tooling is to be used on.
(Federal D-2500, Sheffield 10-M full 15″ column, Moore 814 H .0014/. 000020 scale, etc.). - Required configuration of air ring (Thru [center jet], close to shoulder, or super close to shoulder).
If super close to shoulder, specify required distance from shoulder.
Note: length of lands and/or distance from shoulder may determine jet size. - Number of jets: 2 jet – roundness, straightness; 3 jet – cloverleaf or lobing condition; 4 or 6 jet
for average diameter. - Clearance required – min., standard, max.
- Accessories – handles, hose fittings, adapters, etc.
| STANDARD JET SIZES UNIVERSAL, WESTERN, EDMUNDS, MOORE, STANDARD, GAR, PRATT & WHITNEY STYLE AIR PROBES SIZE RANGE STANDARD JET SIZE |
|
|
.060 – .090
|
.018
|
|
.090 – .125
|
.025
|
|
.125 – .300
|
.032
|
|
.300 – 5.000
|
.042
|
| FEDERAL STYLE AIR PROBES MODEL STANDARD JET SIZE |
|
D-2500 thru D-8000
|
|
EAG-31XXX thru EAG-32XXX .050
|
|
D-10,000 thru D-32,000
|
|
EAG-33XXX thru EAG-XXX .025
|
| SHEFFIELD STYLE AIR PROBES SIZE RANGE STANDARD JET SIZE | |
|
.125 – .300
|
.047 – 3 / 4 AMPLIFICATION
|
|
.300 – 5.000
|
.078 FULL AMPLIFICATIONS
|
PROBES FOR SHEFFIELD COLUMN COMPARATORS JET SIZES – CAPABILITIES – TECHNICAL INFORMATION JET SIZE AMPLIFICATION |
|
.078 FULL – ALL AMPLIFICATIONS
|
|
.062 FULL – 10,000:1 AND LOWER
|
|
.047 3 / 4 |
|
032 1 / 2
|
|
.025 3 / 8
|
|
.018 1 / 4 |
|
.013 BASED ON APPLICATION
|
| Note: Amplifications listed are standard for corresponding jet sizes. However, all amplifications are obtainable with any jet size. Call for technical assistance. |
.
|
SUPER BLIND PROBES
|
| FEDERAL D-2500 thru D-8000 EAG-31XXX thru EAG-32XXX available to measure to .062 from bottom of bore. |
| FEDERAL D-10,000 thru D-32,000 EAG-33XXX thru EAG-34XXX available to measure to .025 from bottom of bore. |
| ALL OTHER STYLES available to measure to .025 from bottom of bore. |
| Note: please specify exact distance required. |
.
